• Used On Campersat EasySeek 645*
• Cable inner and outer only + boot
• Fits into Brake pull bolt

On earlier models order Brake Pull Bolt Kit 8455-0305KIT separately asa well  as 8455-0640  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6455
• Spare Part Only
• early model

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6456+
• Reinstall with care
• c/w mounting and adjustment screws

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6456+
• Grease before use

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used On Campersat EasySeek 6455+
• With 2 screws and washers to fix
• to tray mounting block 6459+

For use on build 6455-6458 you will need 2 x 12 csk screws pn 9102  m5 nyloc ss 9812 + m5 ss wasshers 9702  Spare parts are intended for replacement only 

• Used On Campersat EasySeek to 6458
• Not used on later models

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used On Campersat EasySeek 6455
• Part Band Brake

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• No longer available - see spearate
• items

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6459
• Part Dish Lock Down Mech
• Not used on earlier models

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6455-58
• Part Dish Lock Down Mech
• Not used on 6459

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used On Campersat EasySeek 645*
• c/w Screws

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 645*
• Greased with Cable

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used on Campersat EasySeek 6458+
• For 6458 Drill baseplate to 12mm
• Cable Gland and female fitting

This Item has been replaced with 12mm Cable Gland and Brass female fitting as  used on build 6549 and later. Base place will need to be drilled out to  12 mm clean for O ring, Spare parts are intended for replacement only 

• Used On Campersat EasySeek 6455-58
• Not used on 6459+
• With Fixing Screw

Refer to relevant manual for installation details.  Some items will contain instructions  Spare parts are intended for replacement only 

• Used On Campersat Premium 6455
• With E circlip and 4mm set screw
• Remove circlip for earlier models

Fastens to Brake cable inner. Note for earler models where brake pull bolt is  welded - order separately 8455-0640 Band Brake cable Pack as well as  8455-0305KIT